Master block carvers, who have been doing this for many years, carve these blocks. These blocks are carved by a chisel and wooden hammer to form a design pattern.
The wooden blocks used for this printing are manually carved. The blocks that are called buta have wooden handles.
Before using a new block, they soak it into oil for at least 10 days, It takes great skill to create fluid dynamic designs with a wooden block. Usually the number of colors needed coincides with the number of blocks required for a design.
Because cost increase per meter; designs generally contain no more than 4 to 6 bocks. ln contrast, minimal designs use 1 to 2 blocks to achieve maximum effect. Look into personal references play free pokies games.
The wood is carved by hand with the motifs, outlines and fill blocks. 1 block per color in the print. Each block fits exactly into the overall design so the carving is quite precise.
The first textile-printing technique (making impressions) was that using blocks with raised printing surfaces, which were inked and then pressed on to the fabric.
By repetition, the image from a single block builds up into a complete design over the fabric area.
The number of blocks needed for a design often depends upon the number of colors in the print. An average design has 1 gadh (Background), 1 rekh (Outline) and 4 to 6 datta (filler-blocks); however intricate patterns may require 2 gudh blocks and 1 to 3 rekh blocks and 5 to 10 datta blocks.
The beginnings of the art textile fabrics by the stamping or printing on of colored designs are lost in antiquity.
Each color pattern is stamped individually onto the fabric; the process takes skill and time, as the pattern must be stamped repeatedly across the fabric, color by color.